|
Strand Filling Compound
ChaseBlH2Ock® is designed to prevent ingress and migration of water in underground transmission cables for primary and residential power distribution cables.
A-162-A
Binder and Bedding Tapes
Coated fabrics and specialty films that are designed to mechanically bind and identify components of multi conductor cables, these tapes are the standard in most of the design specifications written for metal clad and metallic shielded cables.
S-217 S-258 S-362 S-352 S-441 CR-200
Strand Shield Tapes
Semi-conducting tapes used to minimize the voltage stresses on cable insulation and prevent “bird-caging” or the loosening of tightly stranded conductors. Strand shield tapes also prevent the penetration of insulating compounds into the stranded conductor.
S-333 S-379 S-391
Insulation Shield Tapes
Thicker semi-conductive tapes produced by calendaring rubber onto coated synthetic fabrics designed to confine the dielectric field within the cable to minimize the possibility of surface discharge. Insulation shield tapes also provide a bedding effect for the metallic shield layers applied in power and distribution cable.
C-7241 C-7053 S-333-P S-469-R
Heat and Flame Barrier Tapes
Specialty coated or laminated fabrics exhibiting a wide range of heat and fire resistant characteristics, these tapes are designed to meet the most stringent fire safety codes for commercial and residential construction.
S-203 S-378 L-991 L-1068
Service Entrance Tapes
High strength tapes manufactured from fiberglass fabrics and light weight films used in electrical service entrance cables for single and multi dwelling residential buildings.
L-962-100-C L-962-50 L-962-50-HY
Oil Well Logging
Thin, high-temperature semi-conducting tapes of woven and non-woven fabrics. These tapes are used for oil well instrumentation cables deployed in both offshore and land based rigs.
L-79 S-208-A
|
